Initial development of soybean plants and sowing quality as a function of speed of the seeder displacement and soil texture

Authors

  • Thiago Donadi dos Santos Faculdade Integrado de Campo Mourão
  • Leandro Meert Faculdade Integrado de Campo Mourão
  • Wagner Antonio Borghi Faculdade Integrado de Campo Mourão
  • Paulo Sérgio da Silva Faculdade Integrado de Campo Mourão
  • Alex Sandro Torre Figueiredo Sakata Seed Sudamerica

Keywords:

Clayey, Sandy, Glycine max, Double plants.

Abstract

Soybean implantation must be carefully planned in order to avoid failures that tend to reduce productivity. The present study had as objective to evaluate the initial development and the quality of sowing of soybean implanted with different sowing speeds in soils with different textures. The experiment was installed in a randomized block design with a 4x2 factorial scheme: four sowing speeds (4, 6, 8 and 10 km h-1) in two types of soils (140 and 350 g kg of clay), seeded with 0.48 m between rows. The evaluated responses were: Plant height, stem diameter, plant spacing and percentage of normal, double and faulted spacings. When only soil types were compared, 3.5% more of double spacings were found in the sandy soil, stem diameter and plant height were lower in this soil. With the increase of velocity the percentage of normal spacings decreased and the percentage of double spacings increased, in the sandy soil the adjustment was linear and in the clay soil the adjustment was quadratic, where with 8 km h-1 began to appear the double plants. The soil behavior in the percentage of failed spacings was similar. The number of plants per meter reduced linearly with the increase of the speed. The best speed was 4 km h-1 regardless of the type of soil.

Author Biographies

Leandro Meert, Faculdade Integrado de Campo Mourão

Eng. Agr., Mestre, Professor do Departamento de  Agronomia

Wagner Antonio Borghi, Faculdade Integrado de Campo Mourão

Eng. Agr., Mestre, Professor do Departamento de  Agronomia

Paulo Sérgio da Silva, Faculdade Integrado de Campo Mourão

Professor do Departamento de  Agronomia

Alex Sandro Torre Figueiredo, Sakata Seed Sudamerica

Pesquisador fitomelhorista

References

ABNT - ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS. Projeto de norma 04:015.06- 004/1995. Semeadora de precisão: ensaio de laboratório/método de ensaio. São Paulo: ABNT, 1996. 2lp.

CONAB – Companhia Nacional de Abastecimento. Acompanhamento da safra brasileira de grãos. Brasília: CONAB, v. 3, n. 12, 178p. 2016.

CORTEZ, J.W.; FURLANI, C.E.A.; SILVA, R.P.; LOPES, A. Distribuição longitudinal de sementes de soja e características físicas do solo no plantio direto. Engenharia Agrícola, Jaboticabal, v.26, n.2, p.502-510, 2006.

DIAS, O.V.; ALONÇO, A.S.; BAUMHARDT, U.B.; BONOTTO, G.J.

Distribuição de sementes de milho e soja em função da velocidade e densidade de semeadura. Ciência Rural, Santa Maria, v. 39, n. 6, p. 1721-1728, set. 2009.

EMBRAPA - EMPRESA BRASILEIRA DE PESQUISA AGROPECUÁRIA. Sistema Brasileiro de Classificação de Solo. 3ed. Brasília: EMBRAPA, 2013.

FANTIN, N.A.M.; MEERT, L.; HANEL, A.; ALENCAR, J.R. de C. C. de; PETEAN, L.P. Componentes de produção e qualidade de semeadura de soja em função de diferentes velocidades do conjunto trator + semeadora. Applied Research & Agrotechnology, Guarapuava, v. 9, n. 3, p. 77-85, 2016.

FERREIRA, D.F. Sisvar: a computer statistical analysis system. Ciência & Agrotecnologia, Lavras, v. 35, n. 6, p. 1039-1042, 2011.

FURLANI, C.E.A.; JÚNIOR, A.P.; CORTEZ, J.W.; SILVA, R.P.E.; GROTTA, D.C.

C. Influência do manejo da cobertura vegetal e da velocidade de semeadura no estabelecimento da soja (Glycine max). Engenharia na Agricultura, Viçosa, v.18,

n.3, p. 227-233, 2010.

JASPER, R.; JASPER, M.; ASSUMPÇÃO, P.S.M.; ROCIL, J.; GARCIA L.C. Velocidade de semeadura da soja. Engenharia Agrícola, Jaboticabal, v.31, n.1, p.102-110, 2011.

KLEIN, V.A.; SIOTA, T.A.; ANESI, A.L.; BARBOSA, R. Efeito da velocidade na semeadura direta de soja. Engenharia Agrícola, Jaboticabal, v.22, n.1, p.75-82, 2002.

NASCIMENTO, F.M.; RODRIGUES, J.G.L.; FERNANDES, J.C.; GAMERO, C.A.; BICUDO, S.J. Efeito de sistemas de manejo do solo e velocidade de semeadura no desenvolvimento do sorgo forrageiro. Revista Ceres, Viçosa, v. 61, n.3, p. 332-337, 2014.

PINHEIRO NETO, R.; BRACCINI, A. L.; SCAPIM, C.A.; BORTOLOTTO, V.C.; PINHEIRO, A.C. Desempenho de mecanismos dosadores de semente em diferentes velocidades e condições de cobertura do solo. Acta Scientiarum Agronomy, Maringá, v. 30, n. 5, p. 611-617, 2008.

RAMBO, L.; COSTA, J.A.; PIRES, J.L.F.; PARCIANELLO, G.; FERREIRA, F. Rendimento dos grãos de soja em função do arranjo de plantas. Ciência Rural. Santa Maria, v.33, n.3, p.405-411, 2003.

REIS, E.F.; MOURA, J.R.; DELMOND, J.G.; CUNHA, J.P.A.R. Características operacionais de uma semeadora-adubadora de plantio direto na cultura da soja (Glycine max (L.) Merril). Revista Ciências Técnicas Agropecuárias, Habana, v.16, n.3, p.70-75, 2007.

TOURINO, M.C.C.; REZENDE, P.M. de; SALAVADOR, N. Espaçamento, densidade e uniformidade de semeadura na produtividade e características agronômicas da soja. Pesquisa agropecuária brasileira, Brasília, v. 37, n. 8, p. 1071-1077, 2002.

Published

11-10-2017

Issue

Section

Articles